6 posts / 0 new
Last post
BBQ
Door hinge - Odd size

I'm in need to replace the hinges on two entry doors that were installed during initial build of the house in 1982. These hinges are not the typical symetrical hinge in that one half of the hinge is 1.5 inches wide and the other is 1.75 inches wide not including the barrel. The overall width is 3.75 inches. The height is 4 inches. The 1.75" side bolts to the door jam.

See the attached two pictures. One picture shows the manufacturers' symbol that's stampped on the hinge. I can't find anyone that recognizes it. The symbol has a capital "P" and a small "d" underneath. I've asked the top 3 hinge suppliers found on the internet and they don't know who made it and they don't have a replacement for it. The other picture is a hand sketch of the hinge dimensions and approximate location of the screw holes.

Does anyone know of a supplier or tell me who made these hinges? Thanks in advance

Correction: The overall width is 3.75". Earlier I put 4.75. Attached is a corrected sketch.

A. Spruce
Re: Door hinge - Odd size

You might check VanDykes.com

JLMCDANIEL
Re: Door hinge - Odd size

You might want to check with Peachtree Doors.
Jack

BBQ
Re: Door hinge - Odd size

Thanks everyone. I'll call these shops today.:)

BBQ
Re: Door hinge - Odd size

The manufacturer was Peachtree Doors and Windows. I called them up and new hinges are on the way. Thanks again.

JLMCDANIEL
Re: Door hinge - Odd size

Glad it worked out for you, and thanks for posting back.
Jack

Sponsored Stories

TV Listings

Find TV listings for This Old House and Ask This Old House in your area.