The Language of Lumber
The words used in the industry to describe wood can be conflicting and confusing, even to a pro. Here's a crib sheet to help you understand just what everyone is talking about.
Wood from conifers, such as pine, spruce, and fir. Generally used for framing.
Wood from deciduous trees, such as oak, birch, and maple. Used for finish work, such as flooring, cabinetry, and moldings. The term can deceive: The relative hardness of some softwoods is more than some hardwoods.
The nicknames for lumber sizes. Softwood dimensions give thickness and width, as in 2x4 ("two-by-four") or 1x8. Hardwood dimensions give only thickness, expressed as a fraction over 4, as in 4/4 ("four-quarter") for 1 inch, or 12/4 for 3 inches. Nominal dimension is an artifact that no longer equals actual dimension.
Lumber's exact size, always smaller than nominal. A 2x4 is about 1½ inches by 3½ inches.
(aka dimension lumber) Wood cut into standard sizes, such as 2x4, 1x6, etc. "Dimension" and "dimensional" are often interchangeable. However, some limit use of the term "dimension lumber" to wood between 2 and 5 inches thick (nominally) and use "dimensional lumber" to distinguish solid wood from engineered lumber.
Lumber thinner than 2 inches (nominal dimension).
Lumber thicker than 5 inches (nominal dimension).
Lumber and panels made from wood fibers or veneers glued or molded together, as with plywood, medium density fiberboard (MDF), or laminated veneer lumber (LVL).
Wood treated under pressure with minerals to make it resistant to rot and insects.
A measure used to price exotic and other woods not milled to standard sizes; equal to 144 cubic inches.
Dried to reduce wood's natural moisture and make it lighter and less likely to deform.
Seasoned by baking with dry heat in a special room.
Seasoned naturally by stacking.
Heated with steam or in a kiln to kill insects and make wood more stable against swelling and shrinking.
Freshly sawn or not yet seasoned and dried.