Hanging a Window Box tout
More in Windows

How to Hang a Window Box

Tom Silva shows you how to install it, and Roger Cook tells you how to fill it and maintain it

Add a splash of color and visual interest to your home with a traditional wooden window box. These charming wood boxes have been used for centuries the world over to dress up plain, somber windows. And now you can install one in just an hour or so with a minimal amount of effort or expense. Here, This Old House general contractor Tom Silva shows the best way to install a prefabricated window box. According to Tom, successful installation depends on proper placement of the box and braces on the house, and securely attaching the components with the appropriate fasteners.

And if your green thumb is a bit out of shape, don't worry. This Old House landscape contractor Roger Cook gives his top tips for preparing, planting and maintaining window boxes. So take the afternoon off, roll up your sleeves and put up a window box or two.


Steps // How to Hang a Window Box
1 ×

Window Box Overview

 
Step One // How to Hang a Window Box

Window Box Overview

window box illustration
Illustration by Gregory Nemec

Click "enlarge this image" to see illustration labels clearly.

 
2 ×

Mark the mounting location

 
Step Two // How to Hang a Window Box

Mark the mounting location

Tom Silva marking the mounting location of a window box
Photo by Mary Beth Montgomery

If your home has double-hung or sliding windows, measure down 1 inch from the underside of the windowsill directly below one side of the window frame and make a pencil mark to locate the top of the bracket.

For an out-swinging window, measure down 6 to 8 inches.

Tip: Have the window box and brackets handy, already painted or stained.

 
3 ×

Install the top screw on the bracket

 
Step Three // How to Hang a Window Box

Install the top screw on the bracket

installing the top screw of the window box bracket
Photo by Mary Beth Montgomery

Hold the first bracket with its top on the pencil mark.

Mark the bracket for the top screw hole so it falls near the bottom of the first course of siding below the window.

Using a countersink bit on a drill, bore a pilot hole and counterbore into the bracket on the mark.

Fasten the bracket to the house with a 3-inch-long galvanized decking screw through the pilot hole.

Tip: If mounting to vinyl, aluminum, or fiber cement, bore a pilot hole through the siding as well. The screw will bite into the sheathing behind it.

 
4 ×

Check for plumb and install the second screw

 
Step Four // How to Hang a Window Box

Check for plumb and install the second screw

checking for plumb before installing the second screw of a window box bracket
Photo by Mary Beth Montgomery

Hold a 2-foot level against the side of the bracket to ensure that it's perfectly plumb.

Bore a pilot hole and counterbore for the second screw through the bracket just above the horizontal leg, where it will be hidden by the window box.

Drive another 3-inch screw through the bracket.

 
5 ×

Install the second bracket

 
Step Five // How to Hang a Window Box

Install the second bracket

installing the second bracket of a window box
Photo by Mary Beth Montgomery

Hold the second bracket in position under the window-sill, lining it up with the window frame.

Lay a 4-foot level across the two brackets; raise or lower the second bracket until the two are level.

Drill a pilot hole and counterbore into the bracket near the bottom of the siding as in Step 2.

Attach the bracket to the house with a 3-inch decking screw, then follow the directions in Step 3 for plumbing the bracket and driving the second screw.

 
6 ×

Center the window box

 
Step Six // How to Hang a Window Box

Center the window box

Centering the window box
Photo by Mary Beth Montgomery

Set the empty window box on top of the two brackets. Be sure that the angled side of the box faces outward.

Center the box by measuring the overhang on the brackets (as shown).

Tip: A filled window box is surprisingly heavy; don't add the soil and plants until after the box is installed.

 
7 ×

Fasten the box to the brackets

 
Step Seven // How to Hang a Window Box

Fasten the box to the brackets

Fastening the window box to its brackets
Photo by Mary Beth Montgomery

Drill and counterbore pilot holes into the upper rear edge of the box, directly in front of each bracket.

Drive a 2 1/2-inch-long galvanized decking screw through the box and into the upper end of each bracket.

Fill the box with container soil or potting soil, then plant away.

 
 
 

TV Listings

Find TV Listing for This Old House and Ask This Old House in your area.