Best Gifts for Woodworkers (2025)

This 21-piece drill bit set is a convenient gift for any woodworker. The bits come in a plastic storage case with a clear lid for checking your options before opening it. Each bit also features a patented web taper, which increases its rigidity to reduce the risk of breakage.

A planer can help a woodworker perform various tasks, including smoothing flat stock and truing an edge. This model is made from 0.125-inch steel for excellent edge retention. It also has a comfortable cherry wood handle and knob and an adjustable throat plate.

Clamps temporarily hold pieces of wood together while the wood glue dries. The mini bar clamps in this set can exert up to 150 pounds per square inch of clamping pressure. They also have a quick-release trigger for easy positioning and a high-quality resin body for durability.

Pencils help you mark measurements to ensure that you’re cutting pieces of wood to the proper length. These pencils are made from premium wood and have a latex-free eraser. They write with a smooth finish and come in multiple sizes and hardnesses.

This reversible tape can measure up to 16 feet. It has easy-to-read fractions to guarantee precise measurements. It also comes with a built-in pencil sharpener for your Ticonderoga Pencils or other writing utensils.

Making marks on dusty or oily surfaces with a regular marker can be difficult. Thankfully, these fine-point permanent markers have the woodworker in your life covered. These long-lasting black markers come in a pack of 12.

This tool roll is made from water-repellent materials. It has 18 tool slots as well as three pockets for nails and other small parts. Your tools are secured inside of the roll with two buckles. Furthermore, this tool roll is available in multiple neutral colors.

Working with power tools without ear protection can lead to hearing damage. These muffs have comfortable foam cushioning over an internal stainless steel wire that puts consistent pressure on your ears throughout a workday. The muffs reduce sound by 31 decibels, but they’re also available in lower Noise Reduction Ratings if you want to be able to hear more background noise around you.

Working with your hands can dry them out. This hand cream hydrates your skin with a non-greasy, fragrance-free formula. This cream also works on your face, arms, and other parts of your body.

Aprons protect carpenters’ clothes while they work. This apron is made from heavy-duty, flame-resistant leather material. It has six pockets to store woodworking tools and a cross-back strap to keep the apron secure.

This mini hand saw is perfect for cutting through small pieces of wood. It has a six-inch blade and weighs 0.25 pounds. With jagged teeth made from durable steel, the blade works effectively. The saw also has a walnut handle to hold onto.

At just 3.5 by 3.75 inches, this square fits in the pocket of any carpenter while they work. This allows them to pull it out whenever they need to take a quick measurement. It features small holes every 0.0625 inches and five larger holes at 22.5-, 30-, 45-, 60-, and 67.5-degree angles.

This stainless steel ruler is practical for general measurements. With a sliding pocket clip and a pocket-sized design, this ruler can be slipped into an apron or pants pocket and pulled out when it’s needed. This ruler has easy-to-read black graduations as well as a table on the back that converts measurements from fractions to decimals.

While standard bits can drive screws into wood, there are several reasons why a countersink drill bit may be a better option. For example, they can be used to hide screws or drive screws into harder wood. You can drive #4, #6, #8, #10, or #12 screws at an 82-degree angle with this five-piece set.

While a brayer is normally used to spread ink, carpenters can also use it to spread wood glue. It’s helpful if you need to apply a lot of glue at once. This particular roller has a detachable handle to make cleaning the head easy and a built-in stand to keep glue from getting on your work surface.

Used to measure the dimensions of an object, such as a nail, this caliper is another versatile measuring tool to have in your arsenal. This model has four measuring modes. It can also switch between inches and millimeter measurements and be set to zero with the touch of a button.

These steel-toe work boots keep your loved one protected as well as comfortable. The leather boots have a synthetic sole and an oil-resistant outsole, making them highly durable. They’re also available in several colors and sizes to fit the needs of every carpenter.

A laser level can be a useful tool for angling, aligning, or squaring lines. This model has a 360-degree rotating wall attachment that can project a laser line at any angle. It also doubles as a bubble level with two built-in bubble vials on its topside.

If the woodworker you’re shopping for is working on hinging a wooden door, this template will be helpful. This template has eight hinge sizes ranging from 2.5 inches to six inches and five door sizes ranging from 1.375 inches to 2.5 inches. It also features lock-in pins that ensure easy setup.