Willow hybrid trees, also known as Austree willows, grow a staggering 6-10 feet per year, creating a dense, living privacy screen that can block out unsightly views and unwanted noise in a few short years. They can grow to a towering height of 50-75 feet, much taller than most neighborhood regulations allow traditional fences to be. Willow hybrid trees also act as a great windbreak even in winter when they have no leaves, because their branch pattern is so dense.
If you’re looking for a low-maintenance answer to your needs, willow hybrid trees might be a good fit for you.
Willow Hybrid Trees at a Glance
- Tall privacy screen or windbreak
- Helps reduce soil erosion
Willow hybrid trees grow long, upright branches with slim, narrow leaves that have light green tops that are paler green on the bottom. The trees grow at a fast rate of 6-10 feet per year, quickly reaching their maximum height of 50-75 feet tall. Their maximum spread is 20-30 feet.
|Appearance||Long, upright branches and narrow green leaves with light green tops and paler green undersides|
|Hardiness Zones||Zones 4-9|
|Type of tree||Deciduous|
|Sunlight requirements||Full sun to partial shade|
|Soil composition||Highly adaptable but prefers slightly acidic or slightly alkaline moist, well-draining soil|
USDA Hardiness Zones indicate the regions where plants can grow based on minimum winter temperatures. Willow hybrid trees grow in Zones 4-9, which covers almost the entire country, with exceptions like southern Florida and Minnesota.
The best time to plant willow hybrid trees are spring and fall. We recommend following these steps:
- Choose a planting site that receives at least four hours of direct, unfiltered sunlight per day. You don’t need to worry about finding a site that’s sheltered from wind, since hybrid willows act as a vigorous windbreak.
- Clear away any turfgrass, debris, or weeds.
- Dig a hole the same depth as the root ball and twice the width.
- Remove the root ball from the container and place it in the center of the hole.
- Backfill with soil halfway, then water thoroughly. Finish backfilling once the water drains away, tamping down as you go to eliminate any air pockets.
- Apply a 1-2 inch layer of mulch on the root zone, making sure to keep it away from the trunk.
To plant a dense privacy screen, space your willow hybrid trees three feet apart. If you want to create a windbreak, plant a staggered, double row of trees five feet apart in a zig-zag pattern.
Willow hybrids are hardy trees that can thrive in a wide variety of soil conditions and do well in both full sun and partial shade.
Sun and shade
Willow hybrid trees grow in full sun, or at least six hours of direct, unfiltered sunlight per day. They can also grow in partial shade, which is roughly four hours of direct sunlight.
Hybrid willow trees are highly adaptable to a range of soil compositions and pH levels but prefer slightly acidic or slightly alkaline to neutral. The soil must be moist and well-draining. Because willow hybrids are not drought-tolerant, they benefit from a 2-3 inch layer of mulch around their root zone.
You should water newly planted willow hybrids twice a week for two to three months. After that, these trees need deep, irregular watering of about one inch per week, with slightly more given during hot, dry spells in summer.
Feed your hybrid willow tree annually in early spring, as soon as new growth emerges. Use a slow-release, balanced fertilizer with an NPK value of 10-10-10.
Willow hybrid trees do not require pruning in order to maintain their shape. They are considered to be self-pruning, meaning the wind will take care of any overlong branches, so they will fall off naturally.
Frequently Asked Questions
To share feedback or ask a question about this article, send a note to our Reviews Team at email@example.com.