More in Pets

How to Build a Murphy Bed for Your Dog

A mutt-sized Murphy bed hides your dog's crash pad inside a fetching built-in cabinet

Your dog may be as cute as a button, but the typical dog bed—bulky, obtrusive, matted with fur—not so much. Instead of banishing his sleeping spot to the basement, leave it front and center and build a pint-size Murphy bed that stows a sleeping pad inside a handsome built-in cabinet. The flat top offers a convenient spot for your dog's treats and toys, and when guests are due to arrive you can tuck the bed out of the way with little fuss.

Before you dash off to buy materials, size up your pooch and the room he'll sleep in to make sure you've got enough space. (A Murphy bed for a Great Dane will be a mighty big piece of furniture.) The easiest way to size the bed is to make it large enough to hold a pad or mattress that your dog is comfortable sleeping on; check product labels for the size that suits your breed. If you're not using a mattress, get the bed's dimensions by measuring your dog's length and width while he's noozing, then adding at least 6 inches to each number. Whether he sleeps on a mattress or a favorite old blankie, your dog will be glad to have a bed of his own—one that's tidy enough to put in any room.

You can download a parts diagram and cut list here.


Steps // How to Build a Murphy Bed for Your Dog
1 ×

Overview for How to Build a Murphy Bed for Your Dog

 
Step One // How to Build a Murphy Bed for Your Dog

Overview for How to Build a Murphy Bed for Your Dog

Overview for How to Build a Murphy Bed for Your Dog
Photo by Brian Henn/Time Inc. Digital Studio

Here are the main parts of the project, in brief. You can download a parts diagram and cut list here.

1. The Cabinet. A simple box built from plywood and 1× material hides the mattress; we topped ours with a shelf trimmed with molding. Magnetic catches and a locking pin on one side secure the deck upright when not in use.
2. The Deck. Cabinet doors, held together with cleats and attached to the cabinet with a toy-box hinge, fold down to serve as the deck. The mattress is enclosed in a frame of 1× material that's attached to the back sides of the doors.
3. The Drawer Front. A false drawer is fastened to the back of the bed frame with a toy-box hinge so that it can fold up to act as the "foot" of the Murphy bed.

Cut List to Build a Murphy Bed for Your Dog

For the cabinet:
1x8 sides: two @ 35¼ inches
1x8 top: one @ 24 inches
1x4 crosspieces: four @ 22½ inches
1x4 header: one @ 24 inches
¼-inch plywood back: one @ 24 x 36 inches
2 ½ inch baseboard: three @ cut to length
shoe molding: three @ cut to length

For the bed frame:
1x4 short sides: two at 19 inches
1x4 long sides: two @ 25 inches
1x4 crosspieces: two @ 19 inches
1x4 stop block: one @ 3 inches

 
2 ×

Cut the Pieces to Size

 
Step Two // How to Build a Murphy Bed for Your Dog

Cut the Pieces to Size

Cut the Pieces to Size to build a murphy bed for your dog
Photo by Kolin Smith

Use a miter saw to cut the 1x8 and 1x4 material to size according to the cut list. Use a circular saw to cut the ¼-inch plywood to size.

 
3 ×

Assemble the Cabinet

 
Step Three // How to Build a Murphy Bed for Your Dog

Assemble the Cabinet

Assemble the Cabinet to build a murphy bed for your dog
Photo by Kolin Smith

Set the two 1x8 sides on edge and sandwich two 1x4 crosspieces on the flat between them, so that one crosspiece is flush at each end. Secure the pieces by driving 1¼-inch trim-head screws through the sides and into the edges of the crosspieces. Secure a third 1x4 crosspiece flush with one end of the sides, as shown; this will be the bottom of the cabinet. Sandwich a fourth 1x4 crosspiece between the sides, with its top edge 1½ inches below the top of the cabinet. Secure the pieces with 1¼-inch trim-head screws.

 
4 ×

Attach the Cabinet's Top

 
Step Four // How to Build a Murphy Bed for Your Dog

Attach the Cabinet's Top

Attach the Cabinet's Top to build a murphy bed for your dog
Photo by Kolin Smith

Apply wood glue to the cabinet's three top edges. Set the 1x8 top in place. Use a pneumatic nailer and 1¼-inch finishing nails to secure the top to the cabinet.

 
5 ×

Install the Header

 
Step Five // How to Build a Murphy Bed for Your Dog

Install the Header

Install the Header to build a murphy bed for your dog
Photo by Kolin Smith

Lay the cabinet faceup and place the 1x4 header on the flat so that it's flush with the top and sides. Use a pneumatic nailer and 1¼-inch finishing nails to secure it to the cabinet. This header will become a nailing surface for the molding added in Step 6 (next).

 
6 ×

Cut and Attach the Baseboard Molding

 
Step Six // How to Build a Murphy Bed for Your Dog

Cut and Attach the Baseboard Molding

Cut and Attach the Baseboard Molding to build a murphy bed for your dog
Photo by Kolin Smith

Lay a length of baseboard molding upside down on the header, its square edge flush with the top of the cabinet. Mark the ends of the cabinet on the molding. Miter the molding at opposing 45-degree angles. Use wood glue and a pneumatic nailer with 1¼-inch finishing nails to secure the molding to the header. Miter the joining angle on the molding for one side of the box, hold the mitered piece in place, and mark a straight cut flush with the back of the cabinet. Use a miter saw to make the straight cut, then glue and nail the piece in place. Repeat for the opposite side.

 
7 ×

Cut and Attach the Shoe Molding

 
Step Seven // How to Build a Murphy Bed for Your Dog

Cut and Attach the Shoe Molding

Cut and Attach the Shoe Molding to build a murphy bed for your dog
Photo by Kolin Smith

Layer a piece of shoe molding on the front face of the baseboard, with the molding's flat edge flush with the top of the cabinet. Mark and miter the molding in the same manner as you did the baseboard in Step 6. Use wood glue and 1¼-inch finishing nails to secure it. Follow the procedures from Step 5 to cut and attach the shoe molding to the sides of the cabinet.

 
8 ×

Assemble the Bed Frame

 
Step Eight // How to Build a Murphy Bed for Your Dog

Assemble the Bed Frame

Assemble the Bed Frame to build a murphy bed for your dog
Photo by Kolin Smith

Apply wood glue to the cut edges of the bed frame's 1x4 short sides. Sandwich these pieces between the 1x4 long sides to make a frame. Secure the frame by driving 1¼-inch screws through the long sides and into the edges of the short sides, as shown.

 
9 ×

Install the Crosspieces and Stop Block

 
Step Nine // How to Build a Murphy Bed for Your Dog

Install the Crosspieces and Stop Block

Install the Crosspieces and Stop Block to build a murphy bed for your dog
Photo by Kolin Smith

Place two 1x4 crosspieces on the flat between the long sides of the bed frame so that they're butted against the inside surfaces of the short sides, as shown. Drive 1¼-inch trim-head screws through the long sides and into the ends of the crosspieces to secure them. Use 1¼-inch trim-head screws to secure the 1x4 stop block to the outside surface of one long side of the frame, flush with the top, to create a spot for the locking pin you'll make in the final step, Step 18.

 
10 ×

Lay Out the Doors and Drawer

 
Step Ten // How to Build a Murphy Bed for Your Dog

Lay Out the Doors and Drawer

Lay Out the Doors and Drawer to build a murphy bed for your dog
Photo by Kolin Smith

Lay the cabinet doors and drawer facedown and use ¼-inch shims to create even spacing between the three pieces. Lay the bed frame onto the doors and drawer so that it's centered horizontally on the doors and the top is 3¾ inches below the top of the drawer. Use a pencil to trace the outline of the bed frame onto the doors and drawer. (Our outline fell 3¾ inches from the top of the drawer, 1½ inches from the sides of the doors, and 1½ inches from the bottoms of the doors.)

 
11 ×

Screw the Bed Frame to the Cabinet Doors

 
Step Eleven // How to Build a Murphy Bed for Your Dog

Screw the Bed Frame to the Cabinet Doors

Screw the Bed Frame to the Cabinet Doors to build a murphy bed for your dog
Photo by Kolin Smith

Position the bed frame inside the outline you drew in Step 9. Drill pilot holes through the frame's crosspieces and into the top and bottom rails of the doors, where the wood is thicker. Drive 1-inch screws through the pilot holes to secure the bed frame to the doors. Do not screw the bed frame to the drawer.

 
12 ×

Attach the Drawer to the Bed Frame

 
Step Twelve // How to Build a Murphy Bed for Your Dog

Attach the Drawer to the Bed Frame

Attach the Drawer to the Bed Frame to build a murphy bed for your dog
Photo by Kolin Smith

Position a toy-box hinge on the backside of the drawer where it meets the top face of the bed frame. Use the included screws to affix the hinge to the drawer and frame. Remove the shims between the cabinet doors and the drawer. You've now completed the deck of the bed.

 
13 ×

Attach the Deck to the Cabinet

 
Step Thirteen // How to Build a Murphy Bed for Your Dog

Attach the Deck to the Cabinet

Attach the Deck to the Cabinet to build a murphy bed for your dog
Photo by Kolin Smith

Lay the cabinet faceup on a work surface and lay the deck on top of it. The bed frame should fit within the cabinet, and the backside of the doors and drawer should rest atop the cabinet's edges. Use shims to create even spacing between the top edge of the drawer and the header, and between the doors and drawer and the sides of the box. Position a toy-box hinge on the cabinet's lower crosspiece where it meets the bottom edge of the cabinet doors. Use the included screws to affix the hinge to the cabinet and the deck. (If necessary, use multiple hinges to span the cabinet's width. Ours required two.)

 
14 ×

Attach the Magnetic Catches

 
Step Fourteen // How to Build a Murphy Bed for Your Dog

Attach the Magnetic Catches

Attach the Magnetic Catches to build a murphy bed for your dog
Photo by Kolin Smith

Use a screwdriver and the included screws to attach magnetic catches to the bottom edge of the cabinet's upper crosspiece, as shown. Then place the included magnets on the catches, fold the deck upright, and use a pencil to mark the locations where the magnets fall on the back side of the drawer. Fold the deck down. Use the included screws to attach the magnets to the back side of the drawer at the spots you marked.

 
15 ×

Attach the Back of the Cabinet

 
Step Fifteen // How to Build a Murphy Bed for Your Dog

Attach the Back of the Cabinet

Attach the Back of the Cabinet to build a murphy bed for your dog
Photo by Kolin Smith

Turn the cabinet facedown. Use a pneumatic nailer and ¾-inch finishing nails to secure plywood back to the cabinet.

 
16 ×

Install the Cabinet Hardware

 
Step Sixteen // How to Build a Murphy Bed for Your Dog

Install the Cabinet Hardware

Install the Cabinet Hardware to build a murphy bed for your dog
Photo by Kolin Smith

Drill pilot holes for the door and drawer hardware. Use a screwdriver and the included screws to install knobs or pulls.

 
17 ×

Fill Holes and Paint the Cabinet

 
Step Seventeen // How to Build a Murphy Bed for Your Dog

Fill Holes and Paint the Cabinet

Fill Holes and Paint the Cabinet to build a murphy bed for your dog
Photo by Kolin Smith

Use a putty knife to fill joints and nail holes with wood filler. Sand the entire assembly, outside and inside, with 220-grit sandpaper. Prime and paint the cabinet with semigloss paint.

 
18 ×

Install the Locking Pin

 
Step Eighteen // How to Build a Murphy Bed for Your Dog

Install the Locking Pin

Install the Locking Pin to build a murphy bed for your dog
Photo by Kolin Smith

Drill a ⅜-inch pilot hole through the side of the cabinet and into the stop block you installed in Step 9. Insert a knob fitted with a 1¾ inch threaded pin into the hole; this will secure the deck upright when the bed is not in use.

 
 
 

TV Listings

Find TV Listing for This Old House and Ask This Old House in your area.