Step 4: Attach The Brackets

Place the jamb bracket for the closer, as shown, so that the bracket is against the hinge rail and lines up horizontally with the glass trim. Drill pilot holes through the bracket and screw it to the jamb. Slip on the bracket arm and screw it to the jamb too. Screw the closer's door bracket into the factory-drilled holes on the frame.
Ask TOH users about Doors

Contribute to This Story Below

    Tools List

    • drill
    • 1/8-inch drill bit
      -inch diameter drill bit
    • multi-bit screwdriver

    Shopping List

    Screen door