How to Create a Backyard Pond


Project details


1 out of 5 Easy It's all digging and small-rock moving, though you might need a hand pulling the liner taut


$100 to $300 for a 40-square-foot pond

Estimated Time

6 hours

Dan Gibbon may have spent the last three and a half decades around Wisconsin's flat farmlands, but the lapping waters of Lake Superior, where he grew up, were always on his mind. So recently he got out the shovel and started making a pond. His wife, Gloria, had her doubts ("I wasn't that excited with the idea of digging up the backyard," she says). But her hesitance melted away when she saw the fruits of Dan's labor.

Dan's pond attracts birds, frogs, butterflies, and crickets (no mosquitoes, though, thanks to the moving water). It also attracts Dan and Gloria. The couple often sip their coffees there while watching the sunrise, and lounge by the gurgling water after dark. "My wife is actually really glad I did this," says Dan. "And so am I—it's so relaxing."

Now, we figure if a retired schoolteacher can build a pond in a weekend, so can you. So we asked This Old House senior technical editor Mark Powers to show you how to make the one you see here—just like Dan's. All you need is a shovel and a few materials, and before you know it, you'll have your own little "great lake" to enjoy.

Creating a Backyard Pond: An Overview

Gregory Nemec

A free-form pond like Dan Gibbon's can be customized for any landscape, with different rocks, plants, shapes, and waterfalls. But we'll give you some helpful points on placement, size, and materials.

Where to build your pond

Before you start, call 811 or your local one-call center to have electric and gas lines marked so you know where to dig to steer clear of them. Then, when you map out the location of your pond, put it where it will be noticed—visible from a window, off a patio, or along a walkway—but away from the play areas of small children or pets.

Keep clear of major root systems or mature trees, which can block too much of the sunlight plants and fish need. You'll also need to be within reach of a grounded exterior outlet so you can plug in a pump, an essential tool for keeping the water aerated; most pumps come with a maximum cord length of 25 feet, and extension cords are not recommended. You may need to bury the power cord a few inches down in PVC pipe to hide it.

Space permitting, you need at least 40 cubic feet for your pond—about 7 feet by 4 feet—to keep the water clean. An initial shallow terrace just inside the perimeter of the pond holds rocks that conceal the liner edge and keep it in place. A second, deeper terrace supports plants that live in the water and help balance the pond's ecosystem.

As you dig, you must slope the sides of the pond so that if the water freezes, the ice will push up instead of against the liner. Even in warmer climates, small ponds can change temperature rapidly, so if you're adding fish you'll want a deeper pond that will maintain a more consistent temperature and accommodate the fish—18 to 24 inches for goldfish and at least 3 feet for koi.

Additional materials

To maintain the consistent depth of the water, you need to line the pond. A thin layer of sand and old newspapers or burlap bags softens the jagged edges of rocks and roots. But over that, you will need to put a waterproof skin.

There are several types of flexible liners meant for small ponds—made from polypropylene and EPDM, among other materials. Look for one that's weather-resistant, so it will stand up to UV rays and freezing temperatures. It should also be rated "fish-safe" if you plan to stock your pond and come with a warranty of 10 to 20 years so your pond will be watertight for many years to come.

How to Build a Backyard Pond: A Step-by-Step Guide

Step 1: Excavate the area

Kolin Smith

Step 2: Level the pond's edges

Kolin Smith

Step 3: Prepare the base

Step 4: Line the pond

Reader Tip: "Avoid building your pond directly under a tree or you'll find yourself cleaning quite a few soggy leaves in the fall." —Dave Martin, Natick, MA

Kolin Smith

Step 5: Fill the pond

Reader Tip: "Whenever you water your plant beds, also 'water' your pond to make up for any liquid that has evaporated over the week." —Dan Gibbon, Medford, WI

Step 6: Install the pump

Kolin Smith

Step 7: Create a rock border

Step 8: Secure and conceal the hose

Step 9: Landscape your pond

Add plants in and around the pond. Keep the pump on during daytime hours, but shut it off at night so it doesn't attract nocturnal animals.



Back to top ↑