a lighting fixture that uses a barn pulley and a clothesline pulley
More in Salvage

How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Create a unique sconce—based on a commercial industrial-look fixture—for a fraction of the cost

Pulleys have been doing the heavy lifting for centuries. Simple machines comprising a grooved wheel, called a sheave, inside a wood or cast-iron frame, pulleys can be found in various designs and sizes based on the task they were originally created for.

Among the most common and collectible today are barn pulleys with wood sheaves and cast-iron housings. In the late 1800s, most were used to move hay from horse-drawn carts to lofts. To the American farmer, this mechanized system was the antidote to the back-breaking work of slinging hay with a pitchfork.

By the 1950s, the hay elevator had pretty much replaced the barn pulley system. The upside is that recyclers can now find pulleys at flea markets, salvage yards, and auctions, and put them back to work as hangers for potted plants on the porch, wood-block bookends in the den, or as the basis for an adjustable bedside sconce like the one I created at here. To make your own light, follow along for the easy how-to.


Steps // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture
1 ×

Vintage Pulleys

 
Step One // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Vintage Pulleys

an assortment of old pulleys
Photo by Ryan Benyi

Inspired by a $500 industrial-look fixture in a catalog, I made this sconce for a fraction of the cost using a barn pulley. At $22, it wasn't the cheapest pulley, but it was clean, had a nice patina, and was stamped "Myers O.K." on the side. Such maker's marks add value and can also reveal a pulley's age—mine dates to the 1920s. A second, smaller screw-base pulley and the cast-iron bracket were $8 at a garage sale, and the cloth-covered cord, brass light socket, and Edison-style bulb totaled $42 from a lamp supply shop. To protect the bulb and yourself (it can get hot), you might consider adding a metal bulb cage.

Shown: Pulleys cost from $3 to $75. Clockwise from top: Dual-sheave industrial pulley; nautical wood block with hook; well pulley; screw-in shade or clothesline pulley; and barn pulley.

 
2 ×

Clean the Pulley

 
Step Two // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Clean the Pulley

cleaning an old barn pulley
Photo by Ryan Benyi

To protect the wood sheave and give it a nice sheen, rub with beeswax polish. Linseed or tung oil will also do the trick. Wipe the cast-iron frame with WD-40 to clean it and highlight the metal's patina.

 
3 ×

Wire the Socket

 
Step Three // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Wire the Socket

wiring a light socket to a brass housing
Photo by Ryan Benyi

Strip ½ inch of insulation from each wire to reveal bare copper. Wind the neutral wire clockwise around the socket's silver screw and the hot wire around the brass screw. Tighten the screws, and fit the brass housing over the socket.

 
4 ×

Coil the Cord

 
Step Four // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Coil the Cord

fishing an electrical cord through an old barn pulley
Photo by Ryan Benyi

Fish the bare end of the electrical cord through the cast-iron pulley frame and loosely loop it around the grooved wood sheave a few times.

 
5 ×

Attach the Pulley to the Bracket

 
Step Five // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Attach the Pulley to the Bracket

securing the top of an old barn pulley to a wall bracket
Photo by Ryan Benyi

Secure one end of a doubled-up length of twine to the top of the pulley and the other to the bracket using knots of your choice.

 
6 ×

Add a Second Pulley

 
Step Six // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Add a Second Pulley

securing a small screw-mount pulley to a wall bracket
Photo by Ryan Benyi

To guide the cord to a wall socket, insert the fastener end of a small screw-mount pulley through the existing drill-out on the lower portion of the bracket.

 
7 ×

Hook Up the Plug

 
Step Seven // How to Use a Barn Pulley to Make a Wall-Mount Light Fixture

Hook Up the Plug

attaching a plug to the electrical cord
Photo by Ryan Benyi

Once the cord has been threaded through both pulleys, complete the fixture by attaching the plug. The neutral wire wraps around the plug's silver screw, and the hot wire around the brass screw. Congrats! Your new pulley sconce is now ready to hang.

 
 
 

TV Listings

Find TV Listing for This Old House and Ask This Old House in your area.