sunburst mirror frame made from wood shims
Steps // How to Make a Sunburst Mirror Frame
1 ×

Glue Wedge Sections

 
Step One // How to Make a Sunburst Mirror Frame

Glue Wedge Sections

glue wedge sections when making a sunburst mirror frame with wood shims
Photo by Kolin Smith

Arrange three shims of the same length so that the middle one's top extends beyond the tops of the others by the width of a shim. Adhere with wood glue (if desired, use hot glue as well for an instant bond). You'll need an equal number of long and short sections, about 40 of each.

 
2 ×

Build the Frame

 
Step Two // How to Make a Sunburst Mirror Frame

Build the Frame

build the frame when making a sunburst mirror frame with wood shims
Photo by Kolin Smith

Glue the three-piece sections together, tapered ends pointing in. Alternate between short and long, aligning them so that the tallest shim in a short section lies an inch or so lower than the shorter shims in a long section. Make sure the edges lie flush on one side to create a flat surface for the mirror.

 
3 ×

Coat the Wood

 
Step Three // How to Make a Sunburst Mirror Frame

Coat the Wood

coat the wood when making a sunburst mirror frame with wood shims
Photo by Kolin Smith

Once the glue has dried, sand the surface (if desired), then brush the entire frame with a protective coat of shellac, which will bring out the wood's natural golden tones. For a different look, consider spray-painting or staining the shims; just prime the wood first.

 
4 ×

Attach the Mirror

 
Step Four // How to Make a Sunburst Mirror Frame

Attach the Mirror

attach the mirror when making a sunburst mirror frame with wood shims
Photo by Kolin Smith

With the flatter side of the frame facing up, affix the glass, using an adhesive made for mirrors. For added strength, back the frame with a thin square of plywood, adhered with wood glue. Let dry, then attach picture-hanging wire to the back.

 
 

Sponsored Stories

TV Listings

Find TV listings for This Old House and Ask This Old House in your area.