More in Storage

How to Build a Coat Rack

In half a day you can assemble stock lumber and a newel post to create an elegant place to hang your hat

a finished coat rack in a hallway
Photo by Wendell T. Webber

If you're sick of stuffing jackets ­into the cramped hall closet but don't want them dirtying the wall beneath hooks near the front door, a freestanding coat rack could be just the ticket.


Steps // How to Build a Coat Rack
1 ×

How to Build a Coat Rack

 
Step One // How to Build a Coat Rack

How to Build a Coat Rack

exploded illustration of a coat rack with all the parts labeled
Illustration by Gregory Nemec

At 72 inches tall, this handsome entryway accessory has enough height to hold full-length coats and long scarves, and still manages to dress up the space when left bare. Missouri–based woodworker Harvey Joyce designed and built this rack with a store-bought newel post, but you can collect and shape the pieces to assemble your own. For an extra touch of character, Joyce ­applied a crackled paint before coating the entire piece with a durable coat of polyurethane. Whether you choose a decorative finish, routered legs to add dimension, or ornate hooks that make a statement, your new addition will keep your woollies close at hand on your way out the door and promise a clutter-free foyer when you get home.

 
2 ×

Make the Legs

 
Step Two // How to Build a Coat Rack

Make the Legs

exploded illustration of coat rack with unattached legs highlighted
Illustration by Gregory Nemec

Start with an 18-inch length of 5/4x6 oak ($3.60 per linear foot; Dyke's). Mark a 1-inch-wide-by-4-inch-long notch at the upper-left corner. Mark the 2-inch-wide foot on the lower-right corner. Sketch the leg's contoured outline from the notch to the foot (or use this template). Cut the leg using a jigsaw. Trace and cut out three additional legs. Ease all the edges of the legs—except the notch—using 100-grit sandpaper.

 
3 ×

Attach the Legs

 
Step Three // How to Build a Coat Rack

Attach the Legs

exploded illustration of coat rack with attached legs highlighted
Illustration by Gregory Nemec

Drill two holes, one above the other, using a 3/8-inch combination bit (#10 Drill and Driver, about $9; Stanley). Make the counterbore one-third the depth of each leg. Set the notch of the first leg onto the bottom of a 58-inch-tall newel post (about $65; Lowe's). Attach the leg to the newel post using 2½-inch deck screws. Repeat with the remaining legs. Plug each hole with wood glue and a screw-hole button (about $1.45 for 25; McFeeley's).

 
4 ×

Apply the Finish

 
Step Four // How to Build a Coat Rack

Apply the Finish

exploded illustration of coat rack with newel post half-stained highlighted
Illustration by Gregory Nemec

Prime and paint, or wipe on stain and apply a coat of polyurethane. Once the finish is dry, install a hook on each side of the squared top section of the newel post at varied heights to maximize hanging space.

 
 
 

TV Listings

Find TV Listing for This Old House and Ask This Old House in your area.