1 post / 0 new
SMcCull
Loose Tile
SMcCull

Thanks for the reply,the sub floor is 3/4" tongue and groove particle board with 1/2" dura rock backing board. The area in question is 4" from an outside wall , the joist's are 2x12and the center beam is 4x 10 osb{1" ply wood laminated all together. the floor does not appear to have any bounce. The thin set was a mortar mix that was mixed following directions of package. And after letting the tile set with no traffic for 24 hours I applied the grout following the directions on the bag (which was a poly mix)this was also let to set for 24 hours with no traffic. The one thing I did not do was wet the ccb tile backing before applying the thinset. I had to chisel the thinset off the ccb (which was quite a job)it stuck to that but not the tile (the tile came up fairly easy) Thanks again and look forward to hearing from you!

Sponsored Stories

TV Listings

Find TV listings for This Old House and Ask This Old House in your area.