Home>Discussions>PLUMBING>How would you remove this vanity
3 posts / 0 new
Last post
How would you remove this vanity

Looking for suggestions on how to remove a vanity from my bathroom since the drain pipe comes out through the wall and the water lines up through the floor and through the bottom of the vanity. I thought about making the holes on the vanity floor wider with a jigsaw to reach the clearance needed to get over the shut offs. What to you guys think!

Re: How would you remove this vanity

you can cut apart the vanity with a recip or a jigsaw.or shut the water off to the house and cut hte pipes then lift the vanity out of place.. get the shut offs put back on where you cut the pipes

A. Spruce
Re: How would you remove this vanity

If you're trying to salvage the cabinet, enlarge the holes just enough to remove it over the obstacles. If you don't care about the cabinet, then dismantle it without disturbing the pipes and cut the debris free.

When you install the new cabinet, you'll either have to cut holes large enough or reroute the plumbing to the back wall and cut a single access point in the cabinet if necessary.

Sponsored Stories

TV Listings

Find TV listings for This Old House and Ask This Old House in your area.