Complete Home Rehab in 10 Days
By Dan Auito
This report is about taking a house and restoring it to an aesthetically pleasing dwelling that has reclaimed its functional utility. In effect, it is the anti-aging medication for bricks and mortar.
This report assumes that you have already or will soon acquire the proper house. The one that is in essence, ripe for rehab. Be selective and sure of the house’s potential to allow for a profit after all the hard work is done. I will help you find your house or houses.
In the proverbial nutshell, it helps if you choose a house from the start that has a sound plumbing, heating and electrical system.
These are things that are expensive to correct in relation to the value they return to you upon resale. Most often, people cannot see the inner workings of these systems and they take them for granted.
Very few buyers are going to give you an extra $15,000-$20,000 in your asking price because you have replaced things that they can’t see and already take for granted as just a basic component that is buried in the structure. Also, they assume these components to be warranted against defects by you.
After all, it is mandatory in most, if not all states that you fill out a disclosure form that tells the buyer of every defect that exists or ever has to your knowledge. So inspect the systems of your investment alternatives carefully, as they can be expensive to repair and replace, with minimum dollar return value being realized at the sale.
Along these same lines, you should also pay close attention to the following cash vacuums:
• Structural Integrity
Here are a few ways to quickly gage a home from its appearance:
Stand across the street from it. Now look at the bones of the structure. Does it look like a sway-backed horse, with the roof sagging in the middle? Does it have flat areas in its design that don’t allow water to be drained away quickly?
Water, dampness and rot are the equivalent of cancer to the human body when it concerns a structure. Shingles can be replaced. That won’t necessarily stop me from buying. Usually I will use that old roof as a bargaining chip in negotiating the seller down to a lower price. However, if I crawl into the attic and see that the plywood has become rotted and truss members are also affected, it’s time to move on to my next potential deal. Life is too short and I will never rehab it in 10 days if I have to rip the roof off and rebuild it too.
Some other conditions, such as sagging eves, wavy roof surface, rotten fascia and trim pieces, and insect infestations can be deal killers too, if severe.
Solution: Get into the structural members with a long, sharp, sturdy, standard flat-tip screwdriver and attempt to penetrate structural components that are made of wood. You won’t hurt anything if there are no underlying deficiencies. However, if someone has freshly painted over or patched it, that screwdriver is one heck of a lie detector! Use it.
Now, I’m not saying people would do that. It may just be the termites have eaten everything but the exterior coating of the wood to conceal their activity whatever the case probe.
There are also tile roofs, metal roofs, cedar shake roofs, hot-rolled roofing, tar and gravel roofs and always a few new high-tech roof coatings. I feel my main concern is whether the decking or the roof support structure has been undermined by water, insects, rodents, poor materials, poor design or craftsmanship, a lack of fasteners, strapping, etc.
Shingles and coatings can be replaced. Just know what is underneath. That’s my criteria. Negotiate lower for needed replacement of roof coverings if you can. I dwell on roofs because it protects everything else!
Next on the list of deal killers is the foundation. The same thing applies to the foundation. I will start by standing back from it and looking at it from a distance. Does this place look like the Leaning Tower of Pisa? Or are the seams coming apart? Do the windows and doors look square? Are porches, stairs and additions on firm ground as well?
Block homes can tell you very quickly if they are stressed out just by the appearance of the mortar joints. Those giant unsettling cracks can and do tell a story. This does happen and mortar cracks maybe 10-years old. You need to investigate further.
Once again, water is a sign of trouble with foundations because it leads to erosion, rot, mold and mildew. It washes out foundation materials and slabs will crack. It rots sill plates and your walls are no longer firmly attached to a base.
If you have a crawl space, it’s time to get your coveralls on and get in there. Now, let’s use our heads here and I mean this! Before you enter a dark, supposedly uninhabited, infrequently entered, dark and restrictive to movement area, assess the situation. Ask someone who has knowledge of the dwelling if there has been any animal activity that they know of. You may also encounter bees, wasps, ants, spiders, snakes, slugs, mosquitoes, rats, mice and a host of other inhabitants. Beware and be prepared. It’s truly another world in some cases.
If you don’t want to do it, hire a professional and I do mean a pro, not some Joe who says he is one. For goodness sake, use a licensed professional home inspector to protect yourself in all areas if you’re just not sure!
OK, you’re a trooper and you’re going in. Good for you, Rambo! You’ll make it in this business because it takes faith, guts and determination. By getting into this type of situation, you’ll learn a lot more about every part of the homes you inspect.
You should have a strong flashlight, your trusty screwdriver, maybe some insect repellent and a safety observer standing at the access entry to give you piece of mind. Now you can go to the perimeter walls and inspect where the walls meet the foundation. Look for rot, misalignment, cracks, separations, water damage or any other condition that doesn’t appear normal.
While you’re down there, look at the other foundational supports, you will see pier blocks and posts, other concrete support pillars and walls, beams, joists and cross bracing, and the underside of sub-flooring. Check this stuff’s condition. Does it look original? Is it structurally sound? Or are there some discrepancies that need further investigation? Take a good look and smell!
Don’t leave yet. You also will want to look at all that plumbing and electrical that is there as well. Scan the perimeter. Do you see any sunlight coming in from where it shouldn’t be? That might be a hole that needs repair. This is common sense land, not computer a chip lab. You can inspect for general condition. Simply follow everything to its logical end, looking mainly at the condition of the different components.
OK, you’ve made mental and physical notes. Now dust yourself off and go inside the house if everything has checked out so far.
So the roof and foundation have passed your keen eye. Let’s look at the rest of the house with respect to its structural integrity. More than half of your structural integrity check at this point is already complete as the roof and foundation are two of the most important components and those have been done. Now you are left with the interior spaces of the structure.
Here’s what I do once inside. I stand at the front door with a checklist in hand (www.inspectamerica.com) and I begin to scan the walls, ceiling and floors. I’m looking for water stains on all three surfaces, as well as patches that were used to repair or conceal damage. I go through every room and look for signs of damage or concealment.
Any flat floor is a good candidate for my scientific marble test. I’ll drop my marble; if it rolls to a corner, that floor ain’t level, Buckwheat. That’s a simple test but I do want to know that the under-layer or sub-flooring is sound and firmly attached to all those joists, and beams and trimmers and blah, blah, blah.
Soft spongy floors are of concern, creaky floors are annoying and rotten floors are another story. So once again, I’m looking at the structural support of the floors. I don’t care that the cheap, yellowed vinyl is coming up at the seams. I don’t care that the carpet is matted down or thread bare, and I don’t mind if the finish is worn off of hardwood floors or tiles are loose.
Floor coverings fall under the label of cosmetics. That’s such a pretty word and that’s what you want to concentrate on: cosmetics...more on that in a moment.
So the floors pass my test for sub-flooring and structural integrity is great. Now I can check that the walls are square because they are attached to that floor, and then I can check that the doors all operate properly and are square too.
How much more can there be than that, Dan? Well, let me tell you a few things that can bite you here. Let’s say the structure overall is good. By that, I mean you have a solid roof, a solid foundation and sturdy floors and walls.
What is behind those walls? The things that bite you aren’t usually seen until you get bit. One particular painful bite is finding out your wiring is not grounded or that the circuits are not properly protected. You’re looking for three-pronged outlets and modern plastic-encased wiring made of copper, not aluminum. You want circuit breakers, not fuses. What you really need here is a licensed electrician to do this more in-depth and professionally licensed review of the system.
I have seen more than one Joe Homeowner rehab go up in flames because of a lack of respect for electricity. Licensed electricians bring you up to code and protect your investment. Find a good one and make it a point to shower him or her with praise, attention and money well spent.