Home>Discussions>PLUMBING>Galvanized to PVC Question
1 post / 0 new
Joshua
Galvanized to PVC Question
Joshua

In my situation there is not enough room between the galvanized fittings to cut and have a stub big enough to use a no-hub adapter. I am working with a 1-1/2" waste line. I am wondering if I can connect one side of a No-hub adapter over the female portion of a galvanized fittings (maybe use a 2" to 1-1/2" no hub?) And the other to the PVC? Or am I not allow to put it of a fitting and it NEEDS to be on a "regular" section of pipe? (the "regular" section is under the floor on the second story and I don't want to pull the floor up).

 

Or should I try using a PVC 1-1/2" male threaded adapter to connect the PVC to the female end of the galvanized fittings (could someone recommend the correct adapter?)

 

Thank you for your help in advance!

Sponsored Stories

TV Listings

Find TV listings for This Old House and Ask This Old House in your area.