Home>Discussions>PLUMBING>Fixture venting question
5 posts / 0 new
Last post
Lynne
Fixture venting question

I'm planning a below-grade bathroom with a sewage ejector pump, toilet, sink, and shower. I understand the sewage ejector needs its own vent.

Can I tie the fixtures to a single vent? What about to an existing vent?

I'll likely have a professional do the work, but I like to be armed with a little knowledge.

Thanks!

johnjh2o
Re: Fixture venting question

Your fixtures and the ejector can connect to the same vent. They can also connect to a existing vent as long as it's connected 6" above the flood rim of the highest fixture.

John

Lynne
Re: Fixture venting question

Thank you!

plumbingjim17
Re: Fixture venting question

That also make auto vent's or some people call them scooter vents or mechanical vent's that also can be used long as they are exposed and not buried in a wall without access.

Ben Franklin Plumbing Of Alpine
304 Meadowlark Drive, Alpine, UT 84004
(801) 960-1567 ‎
benfranklinplumbingalpine.com

MLBSF
Re: Fixture venting question

auto vents are not code in every state.

Sponsored Stories

TV Listings

Find TV listings for This Old House and Ask This Old House in your area.