Home>Discussions>BATHROOMS>Another Backer Board Question
2 posts / 0 new
Last post
rolls831
Another Backer Board Question

After exposing the 2x4's with sheetrock removal, I checked for squareness. Some 2x4's stick out causing the level to teter toter. To make them all level and square do I brake out the sander or plane to make them even across? If I install the backer board chances are it won't be level, bad for tile. I'm sure someone has run into this before. Any suggestions?

i.m.plummin
Re: Another Backer Board Question

You need a straight edge and a table saw or some skill. Rip strips according to the desired thicknes and firthe wall to square and flat.

TV Listings

Find TV listings for This Old House and Ask This Old House in your area.