• In this video, This Old House landscape contractor Roger Cook shows how to increase the water flow for happier, healthy plants.

    Steps:
    1. Attach a pressure gauge to the end of the garden hose that's supplying water to the irrigation system.
    2. Remove one of the emitters (drip nozzles) from the irrigation tubing and attach the pressure gauge. The water pressure at the emitter should be about 20 psi (pounds per square inch).
    3. To improve water pressure and flow, divide the irrigation system into two zones. Cut the tubing in the middle of the system, and seal off the cut-ends of tubing.
    4. Retest the water pressure at the emitter. Again, it should be about 20 psi.
    5. Now use two garden hoses, one to supply water to each half of the irrigation system.
    • Difficulty: Easy
      Requires working on hands and knees, but there's no heavy lifting
Ask TOH users about Yard & Garden

Contribute to This Story Below

    Video Directory

    Selected Topic/Section

      Tools List

      • pressure gauge
        Pressure gauge
      • Aviation Snips
        Snips

      Shopping List

      Assorted irrigation fittings