• In this video, painting contractor Mark O'Lalor shares his tips for paint rollers.

    Steps:
    1. Use only high-quality -inch-thick nap roller sleeves.
    2. Wipe new roller sleeve against duct tape to remove loose lint fibers.
    3. Dip new roller sleeve into water, squeeze out the excess water, then spin the roller dry with a spin-dryer tool.
    4. Use a paintbrush to cut in around the room perimeter. Allow the paint to dry completely before rolling on any paint.
    5. Roll paint from a large roller bucket, not a flat paint tray.
    6. Dip the roller sleeve into the paint, then roll off the excess paint inside the roller bucket.
    7. Roll a 2-foot to 3-foot-long horizontal strip of paint along the top of the wall, close to the ceiling.
    8. Reload the roller in the roller bucket and paint a vertical strip from the baseboard up to the ceiling. Repeat two or three more times until you've painted the entire wall section beneath the first horizontal strip of paint.
    9. Smooth out the painted section by lightly rolling over the wall; be sure to overlap each previous stroke.

Contribute to This Story Below

    Video Directory

    Selected Topic/Section