Ask TOH users about Furniture

Contribute to This Story Below

    Video Directory

    Selected Topic/Section

      Tools List

      • miter saw
        Sliding compound miter saw to crosscut the boards to length
      • adjustable clamp
        Clamps to hold the parts together during assembly
      • circular saw
        Circular saw to cut the parts to width
      • framing square
        Framing square and combination square for marking cutlines
      • jigsaw
        Jigsaw to cut notches and curves
      • drill
        Drill/driver
      • hand plane
        Hand plane to straighten board edges
      • sandpaper
        120-grit sandpaper
      • sanding block
        Sanding block
      • pencil compass
        Compass
      • torpedo level
        Torpedo level
      • 3-inch wide paint brush
        3-inch paintbrush to apply teak oil

      Shopping List

      ½ x 10 cedar boards.
      Get four 8-foot lengths

      1 -inch stainless-steel trim-head screws

      Teak oil to finish the chair