• This Old House host Kevin O'Connor discovers pro painter Rich O'Neil's secrets for brightening up old doors with a coat of paint.


    1. Use a clean cotton cloth and liquid degreaser or cleanser to remove all dirt, grease and grime from cabinet doors. Wipe the doors dry with a clean, dry cloth.
    2. Lightly sand the flat surfaces of the doors with a random-orbit sander fitted with 100-grit sandpaper.
    3. Hand-sand the edges where the door frame meets the door panel.
    4. Dust off the door with a dry paintbrush, then wipe down the surface with a tack cloth to remove all sanding dust.
    5. Brush on a coat of primer.
    7. Use a relatively dry brush to smooth the primer around the door frame, and then the panel; work from the corners and edges in toward center of the panel.
    8. Install two screw hooks into the end of each door. Be sure to put the hooks into the bottom ends of the base-cabinet doors, and into the top ends of the upper-cabinet doors to hide the holes.
    9. Set two 2x4s across two stepladders to create a painting/drying station. Install a series of screw hooks into the underside of the 2x4s.
    10. For each door, insert a 1 5/8-inch drywall screw into one of the hinge-screw holes to serve as a handle.
    11. Now hang a door onto the screw hooks in the 2x4s.
    12. Use a paintbrush to apply primer to the back of the door; allow the door to hang from the hooks until dry. Repeat for remaining doors.
    13. Once the primer has dried, lightly hand-sand the doors with 120-grit sandpaper.
    14. Wipe off the sanding dust with a tack cloth and apply two coats of semi-gloss paint.
    15. After the paint dries, apply two coats of water-based polyurethane, making sure to lightly sand between coats with 120-grit sandpaper.

    See products and services for this video
    • 45 to 60 minutes per door for all coats, not including drying time
    • $60 to $80 for all the cabinet doors in an average-size kitchen
    • Difficulty: Easy to moderate
      patience is required to produce professional results, but there's nothing strenuous about painting cabinet doors.
Ask TOH users about Painting

Contribute to This Story Below

      Video Directory

      Selected Topic/Section

      Tools List

      • paintbrush
        2- to 3-inch-wide paintbrushes
        for applying primer, paint and clear polyurethane topcoat
      • random orbit sander
        Random-orbit sander
        used to slightly roughen the doors' surfaces prior to priming

      Shopping List

      1. Spray-on degreaser or household cleanser used to clean the doors before applying the primer coat

      2. Clean cotton rags, for wiping doors clean

      3. 100- and 120-grit sandpaper, for power-sanding and hand-sanding the doors smooth

      4. Tack cloth, for removing sanding dust from doors5. Two stepladders and two 8-foot-long 2x4s, for making a painting/drying station

      6. Screw hooks, used to hang the doors from the painting/drying station

      7. 1 5/8-inch drywall screws, for attaching to doors to serve as temporary handles