How to Install Rainwater Collection

with Landscape contractor Roger Cook, This Old House television

Shopping List

Supplies You Will Need

1. Rain barrel,
used to collect rainwater

2. Diverter and hose,
redirects rainwater from downspout to barrel

3. Hand truck,
used to set rain barrel onto blocks

4. Concrete barrel blocks,
used to create a stable base for barrel

5. Self-tapping gutter screws,
connects diverter to downspout

6. Nylon cable ties,
for securing hose to downspout

7. Soaker hose,
delivers rainwater to garden

8. Mulch,
used to cover soaker hose

Close
Tools List
Tools You Will Need
- Level,
  used to level concrete barrel blocks
- Rubber mallet,
  used to pound blocks level
- Aviation snips,
  used to cut downspout
- Drill/driver,
  used to drive gutter screws
Close

In this video, This Old House landscape contractor Roger Cook explains how to install rainwater collection.

Steps:

1. Install three solid-concrete barrel blocks in garden beside a downspout; check blocks for level.
2. Set rain barrel on top of blocks with its spigot facing the garden.
3. Disconnect and remove the downspout.
4. Attach water diverter to downspout elbow with self-tapping gutter screws.
5. Using template provided, mark and trim top end of downspout with aviation snips to accommodate the diverter.
6. Slide downspout onto diverter and secure with gutter screws.
7. Connect rubber hose to diverter oulet; secure hose to downspout with nylon cable ties.
8. Attach soaker hose to spigot on barrel, then run the hose around each plant in the garden.
9. Cover soaker hose with thick layer of mulch.