Original Air Date: Week of 10/09/08
Landscaping contractor Roger Cook shows a pair of homeowners how to transplant a large, mature tree to their front yard. Then Roger, along with host Kevin O'Connor, plumbing and heating expert Richard Trethewey and general contractor Tom Silva ask, "What is it?" Then, Richard helps two homeowners sleep better at night by quieting their noisy heating system.
Transplanting a large, mature tree
Roger helped two homeowners who recently removed a large red maple tree from their front yard. The tree provided shade and brilliant colors in the fall, but it was unsafe and had to be removed. Rather than plant a small, young tree, which would take many years to grow, Roger suggested transplanting a mature tree. After grinding the stump of the old tree, Roger took the homeowners to a local tree farm to select a new tree. The homeowner selected a flowering tree called an "aristocrat pear." To prepare the large tree for transporting, Roger used a "tree spade," which dug the tree out from below the roots and loaded it onto a truck. At the new location, Roger decided to plant the new tree farther away from the house and dug a hole about 10-feet in diameter and 5-feet deep using an excavator. Next, the tree spade lowered the tree into the new hole. Soil was then was added around the tree and the spades were carefully removed. With the spades gone, Roger raked the soil around the tree and added root stimulant and water.Where to find it?
A tree-spade is a professional piece of machinery and can be found through a garden center, arborist, or tree service.
The tree that the homeowners selected and the tree spade that Roger used were both provided by:
513 Codman Hill road
Boxborough, MA 01719
(978) 635-0409What is it?
The guys try to guess the intended purpose of an unusual-looking product.
Roger showed a plastic device used to keep squirrels from climbing onto your house via a power line.Where to find it?
Critter Guard, Inc.
1101 Lakeview / Suite G
Columbia, MO 65201
573-256-2110www.critterguard.orgQuieting a noisy hot-water heating system
Richard helped a pair of homeowners quiet their noisy hot water heating system, which was keeping them awake at night. Richard removed the cover from a convector in their bedroom and determined that the noise was being caused from copper pipes expanding as they heat up and rubbing against the wood floor and framing in the basement. To fix the problem, Richard installed plastic sleeves called "mickeys," which support the copper heating pipes and isolate them from any wood. What to find it?
"Mickeys" can be found at most home centers and plumbing supply houses.Viewer Tip:
Tom showed a tip from a viewer on how to clean up glue squeeze-out from an inside corner using a plastic straw to scoop up the glue.Where to find it?
Plastic straws are available at most grocery stores.