How to Build a Storage Bed
By , This Old House magazine
Photo: Laura Moss
Arrange the three carcasses as they will be assembled, and clamp them together at the foot. Measure the length and width of the void between the carcasses, as shown. Unclamp them and prime all surfaces.
Steps
- Introduction
- Overview
- 1. Cut the MDF Pieces
- 2. Assemble the Storage Carcasses
- 3. Dry-Fit the Carcasses
- 4. Join the Carcasses
- 5. Install the 2x4 Support Frame
- 6. Cut the MDF Bed-Frame Pieces
- 7. Install the Panels
- 8. Attach the Headboard
- 9. Install the Face Frames
- 10. Install the Cap Trim
- 11. Install the Headboard Trim
- 12. Install the Paneling
- 13. Add the Finishing Touches