Steps

• Introduction
• Overview
• 1. Make Pilot Holes for the Post Anchors
• 2. Set the Post Anchors
• 3. Level and Square the Post Anchors
• 4. Dry-fit the Pieces
• 5. Assemble the Legs
• 6. Install the Legs
• 7. Cut and Assemble the Seat Base
• 8. Attach the Base and Lower Crosspieces
• 9. Cut the Pieces and Install the Side Supports
• 10. Secure the Center Support
• 11. Cut the Seat Boards
• 12. Attach the Seat Boards
• 13. Attach the Backrest Boards and Cap the Top
• 14. Install the Remaining Crosspieces and Vertical Strips
• 15. Cut and Install Horizontal Strips
• 16. Cut the Pieces and Draw the Tail Profile
• 17. Cut the Rafter Tails
• 18. Install the Rafters
• 19. Install the Purlins