How to Build a Ricochet Game Table
By , This Old House online
Photo: Wendell Weber
Using a jigsaw, cut the 1x4 sides to length according to the Cut List. Rip the 1x1 center rail from a 1x4, and cut the 1x1 to length.
Steps
- Introduction
- Overview
- 1. Apply the Finish to the Door
- 2. Tape Off and Paint the Lines
- 3. Remove the Tape
- 4. Apply the Points Graphics
- 5. Apply and Buff the Finish Coats
- 6. Cut the Sides, Ends, and Center Rail
- 7. Cut the Slit for the 1-inch Elastic
- 8. Cut the Slit for the 1-inch Elastic
- 9. Drill Holes in the Sides
- 10. Attach the Sides
- 11. Attach the Center Rail
- 12. Attach the Leg Supports
- 13. Install the Legs
- 14. Insert the Elastic