How to Build a Cornhole Game Set

Photo:  Wendell Webber

While the paint is still tacky, slowly peel the tape at a sharp angle away from the design. Allow the design to dry fully, then coat the deck with a protective layer of polyacrylic to seal the design and prevent it from chipping. The polyacrylic will also create a slick surface that makes it more challenging to land beanbags on the deck without sliding off.

Steps

• Introduction
• Overview
• 1. Outline and cut out the holes
• 2. Cut 2x4 frames and legs
• 3. Position the frames
• 4. Assemble the frames and decks
• 5. Tape off the design
• 6. Paint the design
• 7. Remove the tape
• 8. Attach the handles
• 9. Bolt the legs to the frames

Helpful Info:

Video: How to Build a Cornhole Game Set

Step By Step: How to Build an Outdoor Bar Cart

Gallery: Tool Test: Cordless Jigsaws

Gallery: Using Masking Tape