How to Build a Cornhole Game Set

Photo:  Wendell Webber

For each deck: Set the frame pieces in place so that the short ends sit inside the long sides, and then lay the plywood deck on top, using the deck's square corners to adjust the frame pieces until they are square. Lift the deck and apply wood glue to the top edge of each frame piece and set the plywood deck back in place. Adjust the frame pieces until each sits flush with the outer edge of the deck.

Steps

• Introduction
• Overview
• 1. Outline and cut out the holes
• 2. Cut 2x4 frames and legs
• 3. Position the frames
• 4. Assemble the frames and decks
• 5. Tape off the design
• 6. Paint the design
• 7. Remove the tape
• 8. Attach the handles
• 9. Bolt the legs to the frames

Helpful Info:

Video: How to Build a Cornhole Game Set

Step By Step: How to Build an Outdoor Bar Cart

Gallery: Tool Test: Cordless Jigsaws

Gallery: Using Masking Tape