How to Build an Outdoor Bar Cart
By , This Old House magazine
Photo: David Prince
At the ends of each crosspiece, find the center by drawing two lines from corner to corner. Repeat steps 10 and 11 to drill holes and add insert nuts at these spots.
Steps
- Introduction
- Overview
- 1. Cut the Pieces
- 2. Cut Out the Top Tray's Handles
- 3. Attach Ledges to the Long Sides
- 4. Make the Tray Frames
- 5. Attach the Bottom Boards
- 6. Cut and Mark the Legs
- 7. Make the Notch Cuts
- 8. Drill Holes and Recesses
- 9. Assemble the Sides
- 10. Drill Pilot Holes for the Bottom Tray
- 11. Add Insert Nuts to the Bottom Tray
- 12. Add Insert Nuts to the Crosspieces
- 13. Assemble the Cart Bottom
- 14. Attach the Second Side
- 15. Attach Wheels to the Axle
- 16. Build the Bottle Rack