How to Build an Outdoor Bar Cart
By , This Old House magazine
Photo: David Prince
Apply glue to the cut edge of a short side and the end of a long side. Butt the pieces together to form a corner. Use the nail gun to drive a nail through the top and bottom of the long side and into the edge of the short side. Repeat for all joints for tray frames.
Steps
- Introduction
- Overview
- 1. Cut the Pieces
- 2. Cut Out the Top Tray's Handles
- 3. Attach Ledges to the Long Sides
- 4. Make the Tray Frames
- 5. Attach the Bottom Boards
- 6. Cut and Mark the Legs
- 7. Make the Notch Cuts
- 8. Drill Holes and Recesses
- 9. Assemble the Sides
- 10. Drill Pilot Holes for the Bottom Tray
- 11. Add Insert Nuts to the Bottom Tray
- 12. Add Insert Nuts to the Crosspieces
- 13. Assemble the Cart Bottom
- 14. Attach the Second Side
- 15. Attach Wheels to the Axle
- 16. Build the Bottle Rack