How to Fix Damaged Plaster
By , This Old House magazine
Photo: David Carmack
Wipe away any excess adhesive with a wet sponge. Wait a day or two for it to cure, then back out the screws and scrape off the washers. (Save them for another plaster-repair project.) Also, scrape off any dried adhesive poking out of the holes.
Steps
- Introduction
- Overview
- 1. Drill
- 2. Prime and seal
- 3. Inject the adhesive
- 4. Clamp the wall
- 5. Wipe and wait
- 6. Fill the crack
- Helpful Info:
- Ask This Old House: Painting Over Old Plaster
- Ask This Old House: Cutting a Doorway in a Plaster Wall
- Ask This Old House: Applying Plaster to Drywall
- Ask This Old House: Drywall vs. Plaster
- Article: Preserving Historic Plaster
- Video: How to Plaster a Wall
- Article: Plaster Repair Made Easier
- Ask This Old House: Fixing Cracked Plaster