How to Build a Shade Arbor

By Joseph Truini

Step 6: Positioning lattice strips to build an arbor

Next, lay the nine 1x2 lattice strips across the 2x6 rafters; space them 21½-inches on center. Use a tape measure to ensure that each 10½-foot-long lattice strip overhangs the first rafter by 2-inches.

Steps

Introduction
1. Dig footing holes
2. Treat and lift the posts
3. Assemble 2x8 beams
4. Raise and secure the beam
5. Lay the rafters
6. Lay the lattice strips
7. Fasten the lattice
8. Hide the fastening plates
9. Finish the post corners

Helpful Info:: Article: Build a Graceful Retreat in Your Yard; Skill Builder: Keeping Sanding Belts Clean; Skill Builder: Save Time Sanding; Skill Builder: Dig a Flat-Bottomed Hole; Skill Builder: Enlarging Holes; Skill Builder: Time-Saving Tip for Rough Sanding Jobs; Gallery: Picking Out Good Wood