How to Build a Fountain

By Harry Sawyers, This Old House magazine

Photo: Kolin Smith

Using utility scissors, cut out a 1-inch-wide circle at the center mark. Then cut a three-sided flap at the conduit mark that is big enough to allow you to reach in and remove the pump for servicing

Steps

Introduction
Overview
1. Dig the pump hole
2. Set the basin and conduit
3. Dry-fit the parts
4. Mark an opening
5. Connect the pipe and pump
6. Fit the decking
7. Drill the stones
8. Assemble the fountain
9. Finish up

Helpful Info:: Article: Backyard from Scratch; Skill Builder: Making Holes in Ceramic Tile; Ask This Old House: Repairing a Hose; Skill Builder: Replacing Broken Tool Handles; Article: Five Tips To Keep Your Fountain Running