Step 6: Install the pop-up sprinklers

Install the pop-up sprinklers
Photo: Brian Smith
«»
Attach a pop-up sprinkler onto the end of each length of flexible piping. Push the barbed fitting all the way into the pipe; no glue or hose clamp is needed.

Remove the cap from the sprinkler and install the appropriate spray nozzle, as indicated on the plan.

Ask TOH users about Lawn Care

Contribute to This Story Below

    Tools List

    • pvc pipe cutter
      PVC pipe cutter
    • 100-foot tape measure
      100-foot tape measure
    • trenching shovel
      Trenching Shovel
    • trenching machine
      Trenching Machine,
      rents for about $75 a day
    • adjustable pliers
      Large adjustable pliers
    • utility knife
      Utility knife
    • tongue-and-groove pliers
      Tongue-and-groove pliers.
      for tightening threaded PVC fittings
    • ratcheting screwdriver
      Screwdriver,
      for installing the wall-mounted timer

    Shopping List

    1. DRIP IRRIGATION TUBING

    2. MARKER FLAGS

    for marking sprinkler locations before trenching



    3. FLEXIBLE PIPING

    connects sprinklers to PVC pipe



    4. 3/4-INCH AND 1-INCH PVC PIPE

    5. ASSORTED PVC FITTINGS

    6. GROUND STAKES

    to secure drip-irrigation tubing



    7. ASSORTED SPRAY NOZZLES

    8. POP-UP SPRINKLER

    9. PVC CEMENT AND PRIMER

    10. ZONE VALVES

    11. VALVE BOX

    for housing the valves



    12. BACKFLOW PREVENTION DEVICE

    keeps irrigation water from flowing into home’s water supply



    13. GRAVEL

    for spreading under the valve box



    ] 14. BARK MULCH

    for covering the drip irrigation tubing