Step 8: Fasten mantel to wall

rebuilding a fireplace
Photo: Brian Wilder
«»
• Mark the locations of wall framing.
• Set mantel so it's centered on the surround.
• Push mantel tight to wall and surround.
• Toenail mantel into framing with 8d finish nails (as shown).
Next

Related Content

Ask TOH users about Fireplaces
Discuss

Contribute to This Story Below

Add Comment

    More in Interior

    Tools List

    Close
    • Demolition hammer
      Demolition hammer
    • suction cups
      Suction cups
      for moving heavy slabs of stone
    • notched trowel
      1/2-inch notched trowel
    • brick trowel
      Brick trowel
      for smoothing topping mix in corners of hearth base
    • flat finishing trowel
      Flat finishing trowel
      for smoothing topping mix on hearth base
    • brick hammer
      Brick hammer
    • mallet
      Mallet
    • mason's brush
      Mason's brush
    • circular saw
      Circular saw
    • jigsaw
      Jigsaw

    Shopping List

    Close
    1. STONE SLABS
    Make cardboard templates of the pieces you'll need and take them to a fabricator that specializes in stone countertops.

    2. TILE
    Make cardboard templates as you would with stone, and then plot the layout of the tiles on these. This will give you an exact count, but order extra.