Step 6: Replace hinge screw

Replacing hinge screw
Photo: David Carmack
«»
On the hinge jamb, remove the center screw from the top hinge leaf and replace it with a screw that's long enough to penetrate the trimmer. This prevents the door from sagging and binding.

Tip: If the long screws don't match the ones that came with the hinges, install them behind the hinge leaf.

Next

Related Content

Ask TOH users about Doors
Discuss

Contribute to This Story Below

Add Comment

    More in Interior

    Tools List

    Close
    • hammer
      Hammer or nail gun,
      to attach casing and jambs to rough opening
    • four-foot level
      4-foot level,
      for checking plumb or level
    • drill
      Drill/driver,
      for fastening hinges
    • 16-foot tape measure
      Tape measure
    • chisel
      3/4-inch chisel,
      for fine-tuning mortises
    • Phillips screwdriver
      Phillips-head screwdriver,
      for mounting lockset
    • utility knife
      Utility knife (for trimming shims
    • plumb bob
      Retractable plumb bob,
      for plumbing jamb

    Shopping List

    Close
    1. PREHUNG DOOR WITH SPLIT JAMS

    2. SHIMS

    for adjusting and supporting jambs



    3. STRIKE PLATE

    to protect jamb from latch bolt



    4. LOCKSET

    to hold door closed



    5. 4D FINISH NAILS

    to tack shims in place



    6. 8D FINISH NAILS

    to nail through casing