Add the Front Panel to the Base to build a compost bench
Photo: Kolin Smith
«»

Step 7: Add the Front Panel to the Base

Set the front panel on top of the side slats. Again, countersink pilot holes through the slats into the posts, and secure the pieces with 1¼-inch deck screws.
Ask TOH users about Outdoor Structures

Contribute to This Story Below

    More in Landscaping

    Tools List

    • miter saw
      miter saw
    • spring clamp
      clamp
    • circular saw
      circular saw
    • bar clamp
      bar clamp
    • drill
      drill/driver
    • 1/8-inch bit with combination countersink
      combination countersink bit
    • 1/16-inch drill bit with combination countersink
      1/16-inch drill bit

    Shopping List

    1x4 clear cedar Get eleven 8-footers for the seat and supports.

    2x4 clear cedar Get five 8-footers for the corner posts.

    1x6 clear cedar Get eleven 8-footers for the slats.

    1x1 clear cedar Get one 8-footer for the seat lip.

    1¼- and 2½-inch deck screws

    48-inch continuous brass hinge