Step 7: Make the Right Inside Miter Cut.

making the right inside miter cut with a miter saw
Photo: Ryan Benyi
«»
Set a blank in your miter saw with the left miter against the stop block and cut the right inside miter. Repeat the process on the remaining rail blanks. Then repeat all of Steps 2 and 3 to make the stiles.
Ask TOH users about Doors

Contribute to This Story Below

    Tools List

    • flathead screwdriver
      Flathead screwdriver
    • Phillips screwdriver
      Phillips-head screwdriver
    • combination square
      Combination square
    • framing square
      Framing square
    • miter saw
      Miter saw
    • bar clamps
      Clamps
    • pneumatic finish nailer
      Pneumatic nail gun
    • rounded chisel
      Rounded chisel
    • mallet
      Mallet

    Shopping List

    1-by-1¾-inch poplar nose-and-cove molding Get four 8-footers.

    18-gauge 1-inch nails for pneumatic nail gun

    Wood glue

    Wood putty

    120-grit sandpaper

    Latex primer and paint

    New lockset (optional)

    Note on proportions: A typical interior four-panel door has three equivalent stiles with a matching top rail and a deeper base rail. Mock up simple patterns cut from cardboard to see what size panels will look best on your door.