Step 4: Add the Back

adding the back to the cabinet frame
Photo: Laura Moss
«»
Cut ¾-inch plywood to the inner dimensions of the cabinet frame. Secure through the sides, top, and bottom with wood screws, being sure to drill pilot holes first.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • 16-foot tape measure
      Tape measure
    • pencil
      Pencil
    • Rafter Square
      Rafter square
    • circular saw
      Circular saw
    • bar clamps
      Bar clamps
    • drill
      Drill/driver
    • multi-bit screwdriver
      Screwdriver
    • one-and-a-half inch paintbrush
      Paintbrush

    Shopping List

    Shutter

    Fold-up ironing board

    Iron rest

    Hanging bar

    1x8 boards

    ¾-inch plywood

    1½-inch wood screws

    ¾-inch No. 10 screws

    2 cabinet hinges

    Cabinet knob

    Spackling compound or wood putty

    Paint