Step 3: Attach The Faux Logs

Arrange the disks on the board to fit together tightly—remember, they should appear stacked. Secure each with wood glue and let dry. Then use a nail gun to secure the disks to the board from the back. Place the finished front inside the firebox. Morgan tucked hers behind the lip of her fireplace's curtain screen, but you could make a kickstand support from a triangular piece of wood if needed.
Ask TOH users about Fireplaces

Contribute to This Story Below

    Tools List

    • miter saw
      Miter saw
    • 3-inch wide paint brush
      Paint brush
    • pneumatic pin gun
      Nail gun
    • nails

    Shopping List

    1. Gathered logs

    2. Plywood

    3. Black matte paint

    4. Wood glue