Step 6: Build the lower and middle tiers.

Tom Silva attaching table legs to the middle tray
Photo: Anthony Tieuli
«»
Thread the dowel screw at the bottom of a middle leg through the underside of the lower panel. Hold the leg firmly and twist a lower leg onto the exposed screw until both legs are snug. Repeat for the remaining middle and lower legs.
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Tape measure
    • locking pliers
      Locking pliers
    • drill
      Drill/driver
    • 1/4-inch drill bit
      1/4-inch drill bit
    • 3/32-inch drill bit
      3/32-inch drill bit
    • miter saw
      Miter saw
    • hammer
      Hammer
    • paintbrushes
      Paintbrushes

    Shopping List

    Artists' wood panels, by 12 by 16 inches Get three.

    Table legs, 6 to 8 inches long Get twelve.

    5/16-by-2½-inch wood-to-wood dowel screws Get eight.

    2½-inch deck screws Get four.
    ¼-inch wood dowel for plugs Get one 3-foot section.

    Wood glue

    Wood filler

    220-grit sandpaper

    Primer and paint of your choice