-
How to Create a Low-Maintenance, All-Gravel Driveway
-
How to Lay a Brick Path
-
How to Build a Driveway Apron
-
How to Lay a Stepping-Stone Path
Introduction
Overview
Step 1
Rough Cut the Balusters
Step 2
Trim Balusters to Length
Step 3
Crosscut the Center Post
Step 4
Bore an Anchor Hole for the Center Post
Step 5
Mark the Notches to Lay out the Center Post
Step 6
Cut the Vertical Notch for the Center Post
Step 7
Bevel the Top of the Center Post
Step 8
Create the Decorative Notch: Make the Bevel Cuts
Step 9
Make the Kerf Cuts
Step 10
Clean up the Notch
Step 11
Cut the the End Posts to Length
Step 12
Bevel the Tops of the End Posts
Step 13
Attach the First Bottom Rail
Step 14
Attach the Remaining Rails
Step 15
Attach the Balusters
Step 16
Paint the Piece
Step 17
Install the Steel Rod to Finish
Contribute to This Story Below