Step 2: Install The Wall Mount

Drill pilot holes for the lag screws. Hold the mount up to the wall and position it over the holes. Install the lag bolts and washers with a socket wrench, but don't tighten them completely. Slide the mount left or right depending on where you want the TV, check for level, then tighten each screw, as shown.
Ask TOH users about Home Technology

Contribute to This Story Below

    Tools List

    • multi-bit screwdriver
    • socket wrench
      Socket set
    • studfinder
      Stud finder
    • pencil
    • torpedo level
      Torpedo level
    • drywall saw
      Drywall saw
    • drill

    Shopping List

    TV mount

    PowerBridge (optional)