Step 5: Add the Fluted Casing

Add the Fluted Casing to build a wall-mounted coatrack
Photo: Wendell T. Webber
«»
Turn over the frame and position the fluted casing pieces so that they're centered between the 1×4s. Attach the casings to the cleats with wood glue, and clamp in place until dry. Sand all surfaces with 120-grit sandpaper, and prime and paint the coatrack.
Ask TOH users about Storage

Contribute to This Story Below

    Tools List

    • miter saw
      Miter saw
    • circular saw
      Circular saw (or table saw)
    • drill
      Drill/driver
    • adjustable clamp
      Speed clamps
    • paintbrushes
      Paintbrushes

    Shopping List

    1x4 We chose pine. Get two 8-foot lengths.

    1x3 Get one 8-foot length.

    -by-2--inch fluted door casing Get two 7-foot lengths.

    Wire baskets Get two or more.

    Coat hooks and hardware Get three.

    Cup hooks Get two for each basket.1-¼-inch trim-head screws

    120-grit sandpaper

    Wood glue

    Primer and paint for the coatrack

    Spray primer and spray paint for the wire baskets