Step 6: Add the Spring Clips and Hanging Your Rack

Add the Spring Clips and Hanging Your Rack to build a Spigot-Handle Tool Rack
Photo: Laura Moss
«»
On a pair of pencil marks between two sets of handles, drill pilot holes (be sure to switch to a smaller bit first) for the spring-clip fasteners, and twist in the screws. Now find a nice spot for your rack, install it using the proper hanging hardware for the wall type, and start organizing your garden tools.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • 30-foot tape measure
      Measuring tape
    • combination square
      Combination square (optional)
    • drill
      Drill/driver
    • socket wrench
      Socket wrench
    • multi-bit screwdriver
      Screwdriver

    Shopping List

    Reclaimed molding

    Clear polyurethane spray (satin sheen)

    Spigot handles

    Spring clips and screws¼-inch galvanized lag screws and corresponding nylon spacers

    Hanging hardware