Step 3: Bore Pilot Holes for the Screws

boring pilot holes for table legs
Photo: Ryan Benyi
«»
The screw length should be slightly shallower than the door's thickness. I used ¾-inch wood screws. To keep from drilling all the way through the wood, wrap tape around the drill bit to serve as a depth gauge.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • cat's paw pry bar
      Cat's paw pry bar
    • 16-foot tape measure
      Tape measure
    • Pencil
    • adjustable clamp
      Clamps
    • drill
      Drill/driver
    • circular saw
      Circular saw

    Shopping List

    Small salvaged door

    Prefab steel legs;
    Rustic Living on Etsy

    Tongue-and-groove floorboards
    for the shelf

    ¾-inch wood screws

    ½-inch wood screws

    Wax-based wood conditioner