Step 4: Hang The Gutter

hanging the gutters for installing half-round gutters
Photo: Matthew Benson
«»
With a helper or two, set the gutter into place on the brackets, taking care not to scratch the soft metal. Hook the back edge to the bracket, then hold down the front edge using spring hooks, screws, or stainless-steel pop rivets (shown).
Next

Related Content

Ask TOH users about Drainage & Gutters
Discuss

Contribute to This Story Below

Add Comment

    More in House Exterior

    Tools List

    Close
    • ladder
      Ladders
    • pencil
      Pencil
    • water level
      Water Level
    • 30-foot tape measure
      Measuring tape
    • chalk line
      Chalk line
    • drill
      Drill/driver or Impact driver
    • hole saw
      Hole saw or Metal shears
    • pop rivet gun
      Pop-rivet gun (if using pop rivets)
    • emery cloth
      300-grit emery cloth
    • propane torch
      Hand torch
    • tack cloth
      Wiping cloth

    Shopping List

    Close
    Gutter brackets
    Screws (included with brackets)
    Gutters
    Flux
    50/50 solder