Step 12: Install the Paneling

installing the paneling for a storage bed
Photo: Laura Moss
«»
Cut pieces of beadboard panel to fit into the two halves of the headboard. Use construction adhesive to affix them, and tack them down with a brad nailer. Do the same for all the areas of the face frames with exposed MDF.
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • bar clamp
      Long bar clamps
    • straightedge guide
      Straightedge
    • circular saw
      Circular saw
    • impact driver
      Drill/driver or impact driver
    • paintbrushes
      Paintbrushes
    • miter saw
      Miter saw
    • brad nailer
      Brad nailer or nail gun
    • japanese pull saw
      Jigsaw or Japanese handsaw
    • paintroller
      Paint roller and tray
    • caulk gun
      caulk gun

    Shopping List

    ¾-inch medium-density fiberboard (MDF)
    Get five 4-by-8-foot sheets.

    -inch MDF beadboard panelsGet two 4-by-8-foot sheets.

    1x2 primed MDF trim
    Get eleven.

    8-foot lengths for the stiles, rails, and cap.

    2x4s
    Get three 8-footers.

    Victorian-era door-casing kit (includes rosettes)½x3 lattice strip shoe molding
    Get 20 feet.

    1¼-, 1½-, and 2-inch MDF screws

    2½-inch deck screws

    1½-inch 18-gauge brads

    Construction adhesive

    Wood glue

    ¾-inch quarter-round

    150-grit sandpaper

    Primer and paint