Step 9: Install the Face Frames

installing the face frames for a storage bed
Photo: Laura Moss
«»
For the best fit, measure and cut the 1x2 trim as you go. Starting with the top and bottom rails on the sides, glue them in place, then use a brad nailer to tack them down. Measure, cut, and install the top and bottom rails at the foot of the bed. Next up: all the stiles.
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • bar clamp
      Long bar clamps
    • straightedge guide
      Straightedge
    • circular saw
      Circular saw
    • impact driver
      Drill/driver or impact driver
    • paintbrushes
      Paintbrushes
    • miter saw
      Miter saw
    • brad nailer
      Brad nailer or nail gun
    • japanese pull saw
      Jigsaw or Japanese handsaw
    • paintroller
      Paint roller and tray
    • caulk gun
      caulk gun

    Shopping List

    ¾-inch medium-density fiberboard (MDF)
    Get five 4-by-8-foot sheets.

    -inch MDF beadboard panelsGet two 4-by-8-foot sheets.

    1x2 primed MDF trim
    Get eleven.

    8-foot lengths for the stiles, rails, and cap.

    2x4s
    Get three 8-footers.

    Victorian-era door-casing kit (includes rosettes)½x3 lattice strip shoe molding
    Get 20 feet.

    1¼-, 1½-, and 2-inch MDF screws

    2½-inch deck screws

    1½-inch 18-gauge brads

    Construction adhesive

    Wood glue

    ¾-inch quarter-round

    150-grit sandpaper

    Primer and paint