Step 6: Cut the MDF Bed-Frame Pieces

marking and cutting MDF for the bed frame of a storage bed
Photo: Laura Moss
«»
Use a straightedge and a circular saw to cut the side panels and footboard to size. The side panels overlap the footboard (and will butt into the headboard, in Step 8).
Next

Related Content

Ask TOH users about Furniture
Discuss

Contribute to This Story Below

Add Comment

    More in Interior

    Tools List

    Close
    • bar clamp
      Long bar clamps
    • straightedge guide
      Straightedge
    • circular saw
      Circular saw
    • impact driver
      Drill/driver or impact driver
    • paintbrushes
      Paintbrushes
    • miter saw
      Miter saw
    • brad nailer
      Brad nailer or nail gun
    • japanese pull saw
      Jigsaw or Japanese handsaw
    • paintroller
      Paint roller and tray
    • caulk gun
      caulk gun

    Shopping List

    Close
    ¾-inch medium-density fiberboard (MDF)
    Get five 4-by-8-foot sheets.

    ⅜-inch MDF beadboard panelsGet two 4-by-8-foot sheets.

    1x2 primed MDF trim
    Get eleven.

    8-foot lengths for the stiles, rails, and cap.

    2x4s
    Get three 8-footers.

    Victorian-era door-casing kit (includes rosettes)½x3 lattice strip shoe molding
    Get 20 feet.

    1¼-, 1½-, and 2-inch MDF screws

    2½-inch deck screws

    1½-inch 18-gauge brads

    Construction adhesive

    Wood glue

    ¾-inch quarter-round

    150-grit sandpaper

    Primer and paint